Lock Right Locker

Powertrax Lock-Right performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock during turns. When extreme traction output and high-strength are required, racers, hot-rodders and muscle car owners chose Lock-Right lockers!
Best suited for extreme off-road to severe on-road use, Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.

Brute Force Devices For Rugged Applications
Replacement Of Differential Case Not Required
Ring And Pinion Setup Not Altered
Installs Easily In Front/Rear Or Both
Proven In Most Demanding Applications

2310-LR Application Notes

Warranty

2 Years or 100,000 Miles

2310-LR Specifications

App Model Dana 35 Standard

Axle Shaft Diameter 1.18 (Inch), 1.18 (Inch)

Differential Case Design Type Dana 35, Dana 35

Grade Type Performance

Material Forged

Mounting Hardware Included N

Position Front, Rear

Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov

Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov

Prop 65 Y N N

Ring Gear Bolt Quantity 8, 8

Spline Quantity 27, 27

Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential

Taxonomy B Differential Lockers & Spools, Differential Lockers & Spools, Differential Lockers & Spools

Taxonomy C Drop-in Lockers, Drop-in Lockers, Drop-in Lockers

Taxonomy D Front, Rear, Front, Rear, Front, Rear

Type Open, Mechanical Locker

Where to buy

Vehicle Applications

1968 – 1970 American Motors AMX
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1978 – 1983 American Motors Concord
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1980 – 1988 American Motors Eagle
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1970 – 1977 American Motors Hornet
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1968 – 1974 American Motors Javelin
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1975 – 1980 American Motors Pacer
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1979 – 1983 American Motors Spirit
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1988 – 1989 Chrysler Mercer
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1984 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1985 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1986 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1987 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1988 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1989 Jeep Cherokee
1989 – 1990 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1990 – 1991 Jeep Cherokee
1991 – 1992 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1992 – 1993 Jeep Cherokee
1993 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1994 – 2001 Jeep Cherokee
1986 Jeep Comanche
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1986 – 1987 Jeep Comanche
1987 Jeep Comanche
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1988 Jeep Comanche
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1989 Jeep Comanche
1989 – 1990 Jeep Comanche
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1990 – 1991 Jeep Comanche
1991 – 1992 Jeep Comanche
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1992 Jeep Comanche
1993 Jeep Grand Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1994 – 1998 Jeep Grand Cherokee
1993 Jeep Grand Wagoneer
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1997 – 2001 Jeep TJ
1984 – 1990 Jeep Wagoneer
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1987 Jeep Wrangler
1987 – 1988 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1988 – 1989 Jeep Wrangler
1989 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1990 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1991 Jeep Wrangler
1991 – 1992 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1992 – 1993 Jeep Wrangler
1993 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- Non-ABS
- IFS, C-Clip, and Non C-Clip
- 1.626" Side Gear Hub
1994 – 1995 Jeep Wrangler
1997 – 2001 Jeep Wrangler

Installation

Installation Instructions

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov