Lock Right Locker

Powertrax Lock-Right performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock during turns. When extreme traction output and high-strength are required, racers, hot-rodders and muscle car owners chose Lock-Right lockers!
Best suited for extreme off-road to severe on-road use, Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.

Brute Force Devices For Rugged Applications
Replacement Of Differential Case Not Required
Ring And Pinion Setup Not Altered
Installs Easily In Front/Rear Or Both
Proven In Most Demanding Applications

2311-LR Application Notes

Warranty

2 Years or 100,000 Miles

2311-LR Specifications

App Model Dana 35 Standard

Axle Shaft Diameter 1.18 (Inch), 1.18 (Inch)

Differential Case Design Type Dana 35, Dana 35

Grade Type Performance

Material Forged

Mounting Hardware Included N

Position Front, Rear

Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov

Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov

Prop 65 Y N N

Ring Gear Bolt Quantity 8, 8

Spline Quantity 27, 27

Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential

Taxonomy B Differential Lockers & Spools, Differential Lockers & Spools, Differential Lockers & Spools

Taxonomy C Drop-in Lockers, Drop-in Lockers, Drop-in Lockers

Taxonomy D Front, Rear, Front, Rear, Front, Rear

Type Open, Mechanical Locker

Where to buy

Vehicle Applications

1997 – 1999 Dodge Dakota
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1996 – 2005 Ford Explorer
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
2001 – 2003 Ford Explorer Sport
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
2001 – 2005 Ford Explorer Sport Trac
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
2007 – 2010 Ford Explorer Sport Trac
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1998 – 2011 Ford Ranger
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1985 – 1992 Jeep Cherokee
1993 Jeep Cherokee
1994 Jeep Cherokee
1995 Jeep Cherokee
1996 Jeep Cherokee
1997 Jeep Cherokee
1998 Jeep Cherokee
1998 – 1999 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1999 Jeep Cherokee
2000 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
2001 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1986 – 1992 Jeep Comanche
1993 Jeep Grand Cherokee
1994 Jeep Grand Cherokee
1995 Jeep Grand Cherokee
1995 – 1996 Jeep Grand Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1996 Jeep Grand Cherokee
1997 Jeep Grand Cherokee
1998 Jeep Grand Cherokee
1999 – 2004 Jeep Grand Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1993 Jeep Grand Wagoneer
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
2003 Jeep Liberty
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1997 Jeep TJ
1997 – 1998 Jeep TJ
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1998 – 1999 Jeep TJ
1999 – 2000 Jeep TJ
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
2000 Jeep TJ
2000 – 2001 Jeep TJ
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
2001 Jeep TJ
2002 – 2006 Jeep TJ
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1987 – 1992 Jeep Wrangler
1993 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1993 – 1994 Jeep Wrangler
1994 – 1995 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1995 Jeep Wrangler
1997 Jeep Wrangler
1997 – 1998 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1998 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1999 Jeep Wrangler
1999 – 2000 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
2000 – 2001 Jeep Wrangler
2001 – 2006 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1997 – 2006 Mercury Mountaineer
Application notes:
- For Dana 35
- 27 Spline
- 1.18"
- For Open Differential
- ABS
- C-Clip and IFS
- 1.55" Side Gear Hub
- Part# 3991057REA is Required For Roll Pin Pinion Shaft Applications
1985 – 1987 Oldsmobile Starnet

Installation

Installation Instructions

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov