Lock Right Locker

Powertrax Lock-Right performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock during turns. When extreme traction output and high-strength are required, racers, hot-rodders and muscle car owners chose Lock-Right lockers!
Best suited for extreme off-road to severe on-road use, Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.

Brute Force Devices For Rugged Applications
Replacement Of Differential Case Not Required
Ring And Pinion Setup Not Altered
Installs Easily In Front/Rear Or Both
Proven In Most Demanding Applications

2610-LR Application Notes

Warranty

2 Years or 100,000 Miles

2610-LR Specifications

App Model Dana 60 Standard

Axle Shaft Diameter 1.31 (Inch), 1.31 (Inch)

Differential Case Design Type Dana 60 Standard, Dana 60 Standard

Grade Type Performance

Material Forged

Mounting Hardware Included N

Position Front, Rear

Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov

Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov

Prop 65 Y N N

Spline Quantity 30, 30

Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential

Taxonomy B Differential Lockers & Spools, Differential Lockers & Spools, Differential Lockers & Spools

Taxonomy C Drop-in Lockers, Drop-in Lockers, Drop-in Lockers

Taxonomy D Front, Rear, Front, Rear, Front, Rear

Type Open, Mechanical Locker

Where to buy

Vehicle Applications

1994 – 1997 Chevrolet Avondale
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Chevrolet C10 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Chevrolet C10 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 Chevrolet C10 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Chevrolet C10 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Chevrolet C10 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Chevrolet C10 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 – 1972 Chevrolet C10 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Chevrolet C10 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Chevrolet C10 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 – 1968 Chevrolet C10 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 Chevrolet C10 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Chevrolet C10 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Chevrolet C10 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Chevrolet C10 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Chevrolet C10 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Chevrolet C10 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1964 Chevrolet C20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1964 – 1965 Chevrolet C20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1965 Chevrolet C20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Chevrolet C20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Chevrolet C20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Chevrolet C20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Chevrolet C20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Chevrolet C20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Chevrolet C20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Chevrolet C20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Chevrolet C20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Chevrolet C20 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Chevrolet C20 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Chevrolet C20 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Chevrolet C20 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Chevrolet C20 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Chevrolet C20 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 Chevrolet Express 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 – 2004 Chevrolet Express 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 – 2005 Chevrolet Express 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 Chevrolet Express 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2006 Chevrolet Express 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 Chevrolet Express 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 Chevrolet Express 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 – 2009 Chevrolet Express 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2009 Chevrolet Express 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2010 Chevrolet Express 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2010 – 2011 Chevrolet Express 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2011 – 2012 Chevrolet Express 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2012 – 2013 Chevrolet Express 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2013 Chevrolet Express 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 Chevrolet Express 3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 Chevrolet Express 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 – 2006 Chevrolet Express 3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2006 Chevrolet Express 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 Chevrolet Express 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 Chevrolet Express 3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 – 2009 Chevrolet Express 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2009 Chevrolet Express 3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2010 Chevrolet Express 3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 – 1976 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 – 1977 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1978 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 – 1981 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 – 1984 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 – 1986 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 – 1988 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 – 1990 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1991 Chevrolet G10
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1991 Chevrolet G10
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Chevrolet G10 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Chevrolet G10 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Chevrolet G10 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Chevrolet G10 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Chevrolet G10 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Chevrolet G10 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Chevrolet G10 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 – 1974 Chevrolet G10 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Chevrolet G10 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 – 1976 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 – 1977 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1978 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 – 1980 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1982 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 – 1983 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 – 1984 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 – 1985 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 – 1988 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 – 1990 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1991 Chevrolet G20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1991 Chevrolet G20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Chevrolet G20 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 Chevrolet G20 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Chevrolet G20 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Chevrolet G20 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 – 1972 Chevrolet G20 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 – 1973 Chevrolet G20 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 – 1974 Chevrolet G20 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Chevrolet G20 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 Chevrolet G30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1978 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 – 1979 Chevrolet G30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 Chevrolet G30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1982 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 – 1983 Chevrolet G30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 – 1984 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 – 1985 Chevrolet G30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 Chevrolet G30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 – 1987 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 – 1988 Chevrolet G30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 – 1989 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 Chevrolet G30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1991 Chevrolet G30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1991 Chevrolet G30
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Chevrolet G30 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Chevrolet G30 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Chevrolet K10 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 – 1968 Chevrolet K10 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Chevrolet K10 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Chevrolet K10 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Chevrolet K10 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Chevrolet K10 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Chevrolet K10 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Chevrolet K10 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Chevrolet K10 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 – 1968 Chevrolet K10 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Chevrolet K10 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Chevrolet K10 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Chevrolet K10 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Chevrolet K10 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1965 Chevrolet K20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1965 – 1966 Chevrolet K20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 – 1967 Chevrolet K20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 – 1968 Chevrolet K20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 Chevrolet K20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Chevrolet K20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Chevrolet K20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Chevrolet K20 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Chevrolet K20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Chevrolet K20 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1986 Chevrolet K30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 – 1991 Chevrolet K3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2002 Chevrolet Silverado 1500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 Chevrolet Silverado 1500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 Chevrolet Silverado 1500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 – 2005 Chevrolet Silverado 1500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 Chevrolet Silverado 1500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2002 Chevrolet Silverado 1500 HD
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 Chevrolet Silverado 1500 HD
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 Chevrolet Silverado 1500 HD
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 – 1988 Chevrolet V30
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 – 1991 Chevrolet V3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Dodge B100
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 Dodge B100
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 Dodge B100
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1978 Dodge B100
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 – 1979 Dodge B100
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 – 1980 Dodge B100
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 Dodge B100
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Dodge B100 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 – 1972 Dodge B100 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Dodge B100 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Dodge B100 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 – 1974 Dodge B100 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Dodge B100 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Dodge B200
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 – 1976 Dodge B200
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 Dodge B200
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 Dodge B200
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 Dodge B200
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 – 1979 Dodge B200
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 – 1980 Dodge B200
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 Dodge B200
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Dodge B200 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 – 1972 Dodge B200 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Dodge B200 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Dodge B200 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 – 1974 Dodge B200 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Dodge B200 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 Dodge B250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1982 Dodge B250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 Dodge B250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 – 1989 Dodge B250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 Dodge B250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1994 Dodge B250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1995 – 1998 Dodge B2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Dodge B300
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 Dodge B300
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 Dodge B300
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 Dodge B300
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 – 1980 Dodge B300
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Dodge B300 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Dodge B300 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Dodge B300 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Dodge B300 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1994 Dodge B350
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1995 Dodge B3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1996 Dodge B3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1996 – 1997 Dodge B3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1997 Dodge B3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1998 Dodge B3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 – 1980 Dodge CB300
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Dodge Challenger
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Dodge Challenger
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Dodge Charger
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 – 1967 Dodge Charger
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Dodge Charger
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Dodge Charger
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 Dodge Charger
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Dodge Charger
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Dodge Charger
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Dodge Charger
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Dodge Charger
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Dodge Charger
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Dodge Charger
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Dodge Coronet
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Dodge Coronet
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 – 1968 Dodge Coronet
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Dodge Coronet
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Dodge Coronet
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Dodge Coronet
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Dodge Coronet
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Dodge Coronet
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Dodge D200
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 Dodge D200
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 – 1977 Dodge D200
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 Dodge D200
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 Dodge D200
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 – 1980 Dodge D200
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1959 Dodge D200 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Dodge D200 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 Dodge D200 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Dodge D200 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 – 1972 Dodge D200 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Dodge D200 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Dodge D200 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Dodge D200 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1960 Dodge D200 Series
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1961 Dodge D200 Series
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1961 – 1962 Dodge D200 Series
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1962 – 1963 Dodge D200 Series
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1963 Dodge D200 Series
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1964 Dodge D200 Series
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1964 – 1965 Dodge D200 Series
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1965 Dodge D200 Series
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Dodge D200 Series
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 – 1967 Dodge D200 Series
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Dodge D200 Series
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1993 Dodge D250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 – 1980 Dodge D300
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1982 Dodge D350
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 – 1988 Dodge D350
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 Dodge D350
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1993 Dodge D350
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Dodge Dart
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Dodge Dart
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Dodge Dart
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Dodge Dart
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Dodge Dart
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Dodge Dart
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 – 1973 Dodge Dart
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Dodge Dart
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Dodge Dart
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 – 1975 Dodge Dart
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 – 1976 Dodge Dart
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 – 1977 Dodge Dart
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 Dodge Dart
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Dodge Monaco
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Dodge Monaco
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 – 1968 Dodge Monaco
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Dodge Monaco
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Dodge Monaco
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Dodge Monaco
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Dodge Polara
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Dodge Polara
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Dodge Polara
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Dodge Polara
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Dodge Polara
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 – 1972 Dodge Polara
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Dodge Polara
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Dodge Polara
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 Dodge Ram 1500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 – 2005 Dodge Ram 1500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 – 2006 Dodge Ram 1500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2006 Dodge Ram 1500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2000 – 2003 Dodge Ram 1500 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1994 – 2002 Dodge Ram 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1996 – 2003 Dodge Ram 2500 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1994 – 2002 Dodge Ram 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1996 – 1997 Dodge Ram 3500 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1998 Dodge Ram 3500 Van
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1998 – 2003 Dodge Ram 3500 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 – 1980 Dodge W200
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1959 Dodge W200 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1974 Dodge W200 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1960 – 1967 Dodge W200 Series
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1993 Dodge W250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 – 1980 Dodge W300
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1974 Dodge W300 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1960 – 1967 Dodge W300 Series
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1993 Dodge W350
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Ford E-200 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Ford E-200 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Ford E-200 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Ford E-200 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Ford E-200 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 – 1973 Ford E-200 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Ford E-200 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Ford E-200 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 Ford E-250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 – 2004 Ford E-250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 – 2005 Ford E-250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 – 2006 Ford E-250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2006 – 2007 Ford E-250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 – 2008 Ford E-250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 – 2009 Ford E-250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2009 – 2010 Ford E-250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2010 Ford E-250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2011 Ford E-250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2011 – 2012 Ford E-250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2012 – 2013 Ford E-250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2013 Ford E-250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2014 Ford E-250
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 – 1981 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 – 1983 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 – 1985 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 – 1987 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 – 1988 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 – 1989 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 – 1990 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1991 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1991 – 1992 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1992 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1993 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1994 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1995 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1996 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1997 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1998 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1998 – 1999 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1999 – 2000 Ford E-250 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2000 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2001 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2002 Ford E-250 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 Ford E-250 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 – 1982 Ford E-250 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 Ford E-250 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 Ford E-250 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 – 1984 Ford E-250 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 – 1985 Ford E-250 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 – 1986 Ford E-250 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 – 1987 Ford E-250 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 – 1988 Ford E-250 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 – 1989 Ford E-250 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 – 1990 Ford E-250 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1991 Ford E-250 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1991 Ford E-250 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Ford E-300 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Ford E-300 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Ford E-300 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Ford E-300 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Ford E-300 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 – 1973 Ford E-300 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Ford E-300 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Ford E-300 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 Ford E-350 Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 Ford E-350 Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 Ford E-350 Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 – 1977 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1978 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 – 1979 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 – 1981 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 – 1983 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 – 1985 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 – 1986 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 – 1987 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1991 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1991 – 1992 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1992 – 1993 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1993 – 1994 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1994 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1995 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1996 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1997 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1997 – 1998 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1998 – 1999 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1999 – 2000 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2000 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 – 2008 Ford E-350 Econoline
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 Ford E-350 Econoline
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1978 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 – 1980 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 – 1981 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1982 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 – 1984 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 – 1990 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1991 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1991 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1992 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1992 – 1993 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1993 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1994 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1994 – 1995 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1995 – 1996 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1996 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1997 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1997 – 1998 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1998 – 1999 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1999 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2000 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2000 – 2001 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2001 – 2002 Ford E-350 Econoline Club Wagon
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2002 Ford E-350 Econoline Club Wagon
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1999 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1999 – 2000 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2000 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2001 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2001 – 2002 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2002 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 – 2004 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 – 2005 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 – 2006 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2006 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 – 2008 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2009 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2009 – 2010 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2010 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2011 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2011 – 2012 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2012 – 2013 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2013 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2014 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2014 – 2015 Ford E-350 Super Duty
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2015 Ford E-350 Super Duty
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 – 1986 Ford F-250
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 – 1985 Ford F-350
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 GMC C15/C1500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 GMC C15/C1500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 GMC C15/C1500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 GMC C15/C1500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 GMC C15/C1500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 GMC C15/C1500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 GMC C15/C1500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 GMC C15/C1500 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 GMC C15/C1500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 GMC C15/C1500 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 GMC C15/C1500 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 GMC C15/C1500 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 GMC C15/C1500 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 GMC C25/C2500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 – 1968 GMC C25/C2500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 GMC C25/C2500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 GMC C25/C2500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 GMC C25/C2500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 GMC C25/C2500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 GMC C25/C2500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 GMC C25/C2500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 GMC C25/C2500 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 GMC C25/C2500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 GMC C25/C2500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 GMC C25/C2500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 GMC C25/C2500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 GMC G25
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 GMC G25
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 – 1977 GMC G25
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1978 GMC G25
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 GMC G25
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 GMC G25/G2500 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 GMC G25/G2500 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 – 1980 GMC G2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 GMC G2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 – 1984 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 – 1985 GMC G2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 GMC G2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 – 1987 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 GMC G2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 – 1989 GMC G2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 – 1990 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1991 GMC G2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1991 GMC G2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 GMC G35
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 – 1976 GMC G35
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 GMC G35
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 GMC G35
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1978 GMC G35
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 GMC G35/G3500 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 GMC G35/G3500 Van
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 GMC G3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 GMC G3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1980 – 1981 GMC G3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1981 – 1982 GMC G3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1982 – 1983 GMC G3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1983 GMC G3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 GMC G3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1984 – 1985 GMC G3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1985 – 1986 GMC G3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1986 – 1987 GMC G3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 GMC G3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 GMC G3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 – 1989 GMC G3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1989 – 1990 GMC G3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1990 – 1991 GMC G3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1991 GMC G3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 GMC K25/K2500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 GMC K25/K2500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 GMC K25/K2500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 GMC K25/K2500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 GMC K25/K2500 Pickup
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 GMC K25/K2500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 GMC K25/K2500 Pickup
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 GMC K25/K2500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 GMC K25/K2500 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 GMC K25/K2500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 GMC K25/K2500 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 GMC K25/K2500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 – 1972 GMC K25/K2500 Suburban
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 GMC K25/K2500 Suburban
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1978 GMC K35
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1979 – 1986 GMC K3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1988 – 1991 GMC K3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2003 GMC Savana 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 GMC Savana 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 – 2005 GMC Savana 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 – 2006 GMC Savana 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2006 GMC Savana 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 GMC Savana 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 – 2008 GMC Savana 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 GMC Savana 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2009 GMC Savana 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2010 GMC Savana 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2010 – 2011 GMC Savana 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2011 GMC Savana 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2012 GMC Savana 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2012 – 2013 GMC Savana 2500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2013 GMC Savana 2500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2004 GMC Savana 3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 GMC Savana 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2005 – 2006 GMC Savana 3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2006 – 2007 GMC Savana 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2007 GMC Savana 3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 GMC Savana 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2008 – 2009 GMC Savana 3500
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2009 GMC Savana 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
2010 GMC Savana 3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1987 – 1991 GMC V3500
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 International 1110
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Jeep J20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Jeep J20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 Jeep J20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1976 – 1977 Jeep J20
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1977 – 1988 Jeep J20
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Plymouth Barracuda
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Plymouth Barracuda
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Plymouth Barracuda
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Plymouth Belvedere
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Plymouth Belvedere
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Plymouth Belvedere II
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Plymouth Belvedere II
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Plymouth Cuda
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Plymouth Cuda
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Plymouth Cuda
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Plymouth Fury
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Plymouth Fury
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Plymouth Fury
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Plymouth Fury
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Plymouth Fury
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 – 1971 Plymouth Fury
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 – 1972 Plymouth Fury
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Plymouth Fury
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Plymouth GTX
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 – 1968 Plymouth GTX
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 Plymouth GTX
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 Plymouth GTX
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Plymouth GTX
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Plymouth GTX
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Plymouth Gran Fury
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 Plymouth Road Runner
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1968 – 1969 Plymouth Road Runner
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1969 – 1970 Plymouth Road Runner
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1970 Plymouth Road Runner
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1971 Plymouth Road Runner
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1972 Plymouth Road Runner
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1973 Plymouth Road Runner
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 Plymouth Road Runner
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1974 – 1975 Plymouth Road Runner
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1975 Plymouth Road Runner
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 Plymouth Satellite
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1966 – 1967 Plymouth Satellite
Application notes:
- For Dana 60
- 30 Spline
- For Open Differential
- Verify Spline Count
- Fits Semi Float and Full Float Applications
1967 Plymouth Satellite
Application notes:
- Verify Spline Count
- Fits Semi Float and Full Float Applications

Installation

Installation Instructions

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov