Grip LOK Traction System

If you are looking for the ultimate in traction, the Powertrax Grip LOK can handle the torque of engines producing up to 550hp. It combines the fully-automatic locking action of our traditional locker, with the strength of a fully machined case.
Using our automatic locking technology, the Powertrax Grip Lok delivers automatic mechanically actuated traction. This is our strongest locking differential, offering the ultimate in competition for street, strip and off-road capabilities.

Comes Fully Assembled
Traction Adding Differential Technology
Delivers Automatic Mechanically Actuated Traction
Housed in a Fully Machined, Forged Steel Case

LK443527 Application Notes

Warranty

2 Years or 100,000 Miles

LK443527 Specifications

App Model Dana 35 Standard

Axle Shaft Diameter 1.18 (Inch), 1.18 (Inch)

Axle Shaft Spline Quantity 27, 27

Cover Bolt Quantity 10, 10

Differential Carrier Break 3.54 Ratio and Higher, 3.54 Ratio and Higher

Differential Case Design Type Dana 35, Dana 35

Position Front, Rear

Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov

Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov

Prop 65 Y N N

Ring Gear Bolt Quantity 8, 8

Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential

Taxonomy B Differential Lockers & Spools, Differential Lockers & Spools, Differential Lockers & Spools

Taxonomy C Mechanical Lockers, Mechanical Lockers, Mechanical Lockers

Taxonomy D Front, Rear, Front, Rear, Front, Rear

Type Mechanical Locker

Where to buy

Vehicle Applications

1968 – 1970 American Motors AMX
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1978 – 1983 American Motors Concord
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1980 – 1988 American Motors Eagle
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1970 – 1977 American Motors Hornet
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1968 – 1974 American Motors Javelin
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1975 – 1980 American Motors Pacer
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1979 – 1983 American Motors Spirit
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1997 – 1999 Dodge Dakota
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1996 – 2005 Ford Explorer
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
2001 – 2003 Ford Explorer Sport
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
2001 – 2005 Ford Explorer Sport Trac
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
2007 – 2010 Ford Explorer Sport Trac
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1998 – 2011 Ford Ranger
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1970 – 1972 Ford Royal
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1984 – 1985 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1985 Jeep Cherokee
1985 – 1986 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1986 Jeep Cherokee
1987 Jeep Cherokee
1988 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1989 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1990 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1991 Jeep Cherokee
1991 – 1992 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1992 Jeep Cherokee
1993 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1994 Jeep Cherokee
1994 – 1995 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1995 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1996 Jeep Cherokee
1996 – 1997 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1997 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1998 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1999 Jeep Cherokee
1999 – 2000 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
2000 – 2001 Jeep Cherokee
2001 Jeep Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1986 – 1992 Jeep Comanche
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1993 Jeep Grand Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1993 – 1994 Jeep Grand Cherokee
1994 – 1995 Jeep Grand Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1995 – 1996 Jeep Grand Cherokee
1996 – 1997 Jeep Grand Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1997 Jeep Grand Cherokee
1997 – 1998 Jeep Grand Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1998 Jeep Grand Cherokee
1998 – 2004 Jeep Grand Cherokee
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
2002 – 2003 Jeep Liberty
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1997 Jeep TJ
1997 – 1998 Jeep TJ
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1998 Jeep TJ
1998 – 1999 Jeep TJ
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1999 – 2000 Jeep TJ
2000 – 2001 Jeep TJ
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
2001 Jeep TJ
2002 – 2006 Jeep TJ
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1987 Jeep Wrangler
1987 – 1988 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1988 Jeep Wrangler
1988 – 1989 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1989 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1990 Jeep Wrangler
1990 – 1991 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1991 Jeep Wrangler
1991 – 1992 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1992 Jeep Wrangler
1992 – 1993 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1993 Jeep Wrangler
1994 Jeep Wrangler
1994 – 1995 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1995 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1997 Jeep Wrangler
1997 – 1998 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1998 Jeep Wrangler
1999 Jeep Wrangler
1999 – 2000 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
2000 Jeep Wrangler
2000 – 2001 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
2001 Jeep Wrangler
2002 – 2006 Jeep Wrangler
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts
1997 – 2006 Mercury Mountaineer
Application notes:
- For Dana 35
- 27 Spline
- 3.54 Carrier and Higher
- Dual Drilled For 3/8" And 7/16" Ring Gear Bolts

Installation

Installation Instructions

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov